DAMAGE OR DISCOLORATION
OF SURFACE FINISHES IS NOT COVERED UNDER THE BEAVERSTATE
WARRANTY. |
Chemical and Disinfection Guidelines
|
| Beaverstate Dental makes no representation
as to the disinfection efficacy of any disinfectant product.
Questions regarding product efficacy should be directed to
the specific
manufacturer of that product. We make no warranty expressed
or implied regarding any damage resulting from the use of any
disinfectant. Damage and/or discoloration of any surface is
not covered by our warranty. |
|
|
| Barrier Technique Method |
| There are many products and techniques
for infection control that are presently available on the market.
The BARRIER TECHNIQUE METHOD has proved to be effective in
the
preservation of the surface finish and appearance of your new
equipment. Disposable barrier products should be used and changed
between each patient. Consult your full service dental dealer
for information regarding disposable barrier products. |
| Chemical Disinfection Method |
| The CHEMICAL DISINFECTION METHOD is
an effective means of disinfection, but care is needed in the
mixing
and use of the products. To minimize the accumulation of chemical
residues on your new equipment, you
must wash your equipment daily with a solution of warm water
and mild soap. When mixing any cleaning or
disinfecting chemical product, care should be taken to follow
the manufacturers instructions regarding mixing
and use. If recommended ratios of dilution are not followed,
non-damaging chemical may become corrosive and
damage surface finishes. |
| Non Acceptable Disinfectants |
| Non Acceptable disinfectants and cleaners
include: Household bleach @ 5.25%, Ethyl alcohol, alcohol,
alcohol-based phenols, household cleaners and strong phenols
or alcohol-phenol combinations. The use of
iodine based products has been known to stain painted and upholstered
surfaces. |
| Powdered Flushing Products |
| When FLUSHING UNIT LINES AND WATER
BOTTLE SYSTEMS, care must be taken. If a powdered flushing
product that requires mixing with water is used, the powder
must be thoroughly dissolved in the water. Improper
mixing will cause solution particulates. These particulates
may cause residual debris in the water lines which
will cause the dental system to not work properly. |
| |
